GJZ350*63板式橡胶支座报价

板式支座的分类及表示方法
Classification and expression method of plate support
1、根据桥梁橡胶支座的结构型式分类如下:
1. According to the structural type of bridge rubber bearings, the classification is as follows:
A普通橡胶支座---球冠圆橡胶支座(TCYB系列)；矩形普通橡胶支座(GJZ系列)；圆形普通橡 胶支座(GYZ系列)。
A rubber bearings - spherical rubber bearings (TCYB Series); rectangular rubber bearings (GJZ Series); circular rubber bearings (GYZ series).
B 聚四fu乙西橡胶支座----圆形四fu橡胶支座(GYZF4系列)；矩形四fu橡胶支座(GJZF4系列)
B poly four Fu ethylene rubber bearing - round four Fu rubber bearing (GYZF4 Series); rectangular four Fu rubber bearing (GJZF4 Series)
球冠四fu橡胶支座(TCYBF4系列)。
Four spherical Fu rubber bearings (TCYBF4 series).
2、橡胶支座按胶种适用温度分类如下:
2, rubber bearings according to glue species applicable temperature classification is as follows:
A、绿丁橡胶: 适用温度+60℃∽-25℃
A, green rubber: suitable temperature +60 to -25 degrees
B、天然橡胶: 适用温度+60℃∽-40℃
B, natural rubber: suitable temperature +60 to -40 degrees
C、三元乙丙橡胶: 适用温度+60℃∽-45℃
C, three EPDM: suitable temperature +60 to -45 degrees
2.按支座材料是适用温度分为：
2. according to the bearing material is applicable temperature divided into:
（a） 常温型橡胶支座，硬采用绿丁橡胶（CR）生产，适用温度为-25℃-60℃。不得使用天然橡胶代替绿丁橡胶，也允许在氯丁橡胶中掺入天然橡胶；
(a) rubber bearings at normal temperature, which are made of CR. The temperature is -25 degrees -60 degrees centigrade. Natural rubber should not be used instead of green rubber, and natural rubber may also be added to chloroprene rubber;
（b） 耐寒型橡胶支座，应采用天然橡胶（NR）生产，适用温度为-40℃-60℃
(b) cold resistant rubber bearings should be produced with natural rubber (NR), suitable temperature is -40 degrees -60 degrees centigrade
我公司生产的橡胶支座，保证产品的质量稳定。为此，我厂提供优质的售后服务，客户回访，客户技术难题解答，乃至派工人到客户施工地现场指导。
The rubber bearings produced by our company ensure the quality stability of the products. To this end, our factory provides high-quality after-sales service, customer visits, customer technical problems, and even send workers to customers on-site construction site guidance.
是购买者无后顾之忧。 板式橡胶支座简介我公司生产的板式橡胶支座产品，主要包括有：普通板式支座、四氟乙烯板式支座、球冠板式橡胶支座三种产品。
Buyers are free from worries. Rubber bearing products of laminated rubber bearings produced by our company, mainly include: ordinary plate bearing, tetrafluoroethylene plate bearing, spherical rubber bearing three products.
作为生产企业,我们知道板式橡胶支座位置安装正确与否对橡胶支座的受力状况和使用寿命有直接的影响，为什么一些支座使用后出现问题,其实如果板式橡胶支座的安放不平整，造成橡胶支座局部承压，则支座在活载作用下会产生转动、滑移，甚至脱落。
As production enterprises, we know that the position of the laminated rubber bearings are installed correctly or not on the rubber bearing stress condition and service life have a direct impact, why some support after the use of problems, in fact, if placed in the rubber bearing is not flat, causing local pressure of rubber bearings, the bearing can rotate and slip in the live load next, or even fall off.
此外，板式橡胶支座安装时要保持位置准确，橡胶支座的中心要对准梁体轴线，防止偏心过大而损坏支座。为防止支座产生过大的剪切变形，我们建议橡胶支座在安装 好选择在气温相当于全年平均气温的季节里进行，以保证像胶支座在低温或高温时偏离支座中心位置不会过大。
In addition, the plate rubber bearing should be positioned accurately when installing, and the center of the rubber bearing should be aligned with the axis of the beam body, so as to prevent the eccentricity from damaging the bearing. In order to prevent the bearing from producing excessive shear deformation, we suggest that the rubber bearings should be installed in the season that the temperature is equivalent to the annual average temperature, so as to ensure that the rubber bearings are not too large to deviate from the center of the bearing at low or high temperature.
当在在板式橡胶支座表面粘复一层1.5mm-3mm厚的聚四氟乙烯材料时,就能制作成聚四氟乙烯滑板式橡胶支座它除了竖向钢度与弹性变形,能承受垂直荷载及适应梁端转动外,因聚四氟乙烯板的低摩擦系数,可使梁端在四氟板表面自由滑动,水平位移不受限制,特别适宜中、小荷载,大位移量的桥梁使用.我公司生产的桥梁支座产品不仅技术 、性能优良,还具有构造简单、价格低廉、*养护 易于更换缓冲隔震、建筑高度低等特点.因而在桥梁支座颇受欢迎,被广泛使用。
When the complex of PTFE material in a layer of 1.5mm-3mm thick plate rubber bearing surface, can be made of PTFE sliding plate rubber support in addition to its vertical stiffness and elastic deformation under vertical load and can adapt to Liang Duan rotation, due to low friction coefficient of PTFE plate, the beam end in PTFE the surface free sliding, horizontal displacement is not restricted, especially suitable for medium and small load, large bridge shift. Our company produces bridge bearing products not only technology, excellent performance, but also has the advantages of simple structure, low cost, no maintenance is easy to replace the shockproof, building height is low. So the bridge supports popular welcome, widely used.
二、板式支座的分类及表示方法1、 根据桥梁板式橡胶支座的结构型式分类如下:普通板式橡胶支座---球冠圆板式橡胶支座(TCYB系列),；矩形普通板式橡胶支座(GJZ系列；圆形普通板式橡胶支座(GYZ系列)聚四氟乙烯板式橡胶支座----圆形四氟板式橡胶支座(GYZF4系列)；矩形四氟板式橡胶支座(GJZF4系列)球冠四氟板式橡胶支座(TCYBF4系列)2、 板式橡胶支座按胶种适用温度分类如下:a、氯丁橡胶: 适用温度+60℃∽-25℃ b、天然橡胶: 适用温度+60℃∽-40℃ c、三元乙丙橡胶: 适用温度+60℃∽-45℃
Two, support plate and representation of 1, according to the structure of bridge plate rubber bearing are classified as follows: ordinary laminated rubber bearings - spherical circular plate rubber bearing (TCYB Series),; rectangular plate rubber bearing (GJZ series; circular common rubber support (GYZ Series) - round PTFE laminated rubber bearing PTFE laminated rubber bearings (GYZF4 Series); rectangular PTFE laminated rubber bearings (GJZF4 Series) PTFE laminated rubber bearings (TCYBF4 Series), 2 kinds of rubber plate rubber bearing according to the applicable temperature classification is as follows: A, neoprene: suitable temperature +60 ~ -25 C B, natural rubber: suitable temperature +60 ~ -40 C C, three EPDM: suitable temperature +60 to -45 degrees