丁腈橡胶止水带250*8mm

丁腈橡胶止水带250*8mm
  橡胶止水带又称止水橡皮是以天然橡胶与各种合成橡胶为主要原料，掺加各种助剂及填充料，经塑炼、混炼、压制成型，其品种规格较多，有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。橡胶止水带衡水衡媛工程橡胶厂根据使用情况又可分类为埋式橡胶止水带和背贴式橡胶止水带。该止水材料具有良好的弹性，耐磨性、耐老化性和抗撕裂性能，适应变形能力强、防水性能好，温度使用范围为-45℃-+60℃。当温度**过70℃，以及橡胶止水带受强烈的氧化作用或受油类等**溶剂侵蚀时，均不得使用橡胶止水带。
Rubber waterstop sealing rubber is also called natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, H type, type B E type and Q type, etc.. The rubber factory of Hengshui Heng Yuan, rubber water stop belt, can be classified into buried rubber sealing belt and back sticking rubber sealing belt according to its use. The sealing material has good elasticity, wear resistance, aging resistance and tear resistance. It has strong deformation capacity and good waterproof performance. The temperature range is -45 -+60 C. When the temperature exceeds 70 degrees C, and the rubber water stop zone is eroded by strong oxidation or by the organic solvent such as oil, the rubber sealing belt must not be used.
橡胶止水带常用止水带形式及分类
Form and classification of commonly used water stop belt in rubber water stop belt
橡胶止水带型号常用的止水带形式有：651橡胶止水带，中埋式橡胶止水带，外贴式橡胶止水带，钢边橡胶止水带，遇水膨胀橡胶止水带，p型止水带，pvc塑料止水带，止水钢板。
There are commonly used sealing belts for rubber sealing belt: 651 rubber water stop, embedded rubber water stop, external rubber sealing belt, steel side rubber water stop, water expansion rubber water stop, P type water stop, PVC plastic water stop and water stop steel plate.
根据使用情况又可分类为中埋式橡胶止水带和背贴式橡胶止水带。根据外观形式又可以分为CB型止水带(指中间有孔的中埋式止水带) 、CP型止水带(指中间无孔的中埋式止水带)、EP型止水带(又称外贴式止水带或背贴式止水带，是指外贴式中间无孔型止水带)、EB型止水带(外贴式中间有孔的止水带，又称外贴式止水带或背贴式止水带) 。
According to the use, it can be classified as medium buried rubber sealing belt and back sticking rubber water stop belt. According to the appearance of the form can be divided into CB type waterstop (refers to a hole in the center of medium buried waterstop), CP (the middle sealing strip non porous medium buried waterstop), EP type waterstop (also known as post type waterstop or back stick type waterstop, refers to the post the pass free sealing belt type EB), waterstop (water outside attached a hole in the middle of the belt, also known as post type waterstop or back stick type waterstop).
橡胶止水带规格
Specifications of rubber sealing belt
橡胶止水带常用的规格有300×6，300×8，300×10，350×8，400×10mm等，常用型号为中埋式651型。
The commonly used specifications of the rubber water stop belt are 300 * 6300 x 8300 x 10350 x 8400 x 10mm and so on. The commonly used models are medium - buried 651.
橡胶止水带适用范围：应用于地下构筑物、水坝、贮水池、游泳池、屋面及建筑物质和构筑物的变形缝防水。
The application scope of rubber water stop belt: applied to underground structures, dams, pools, swimming pools, roofing and building materials and structures of deformation joints waterproof.